Power System Analysis :
(Power System Analysis Book by John Grainger and William D. Stevenson Pdf Download)
Power system is very interesting subject in electrical engineering stream. It contents many chapters. most of people searching for pdf book for power system analysis. but in the internet world may contents more number books on the power system subject. But few authors are very important for reading of power system subject. In this article we are provide the best books on the power system analysis.
POWER SYSTEM ANALYSIS :
SYLLABUS :
UNIT - I INTRODUCTION
Modern power system (or) electric energy system - Analysis for system planning and operational studies - basic components of a power system,Generator models - transformer model - transmission system model - load representation. Single line diagram - per phase and per unit representation - change of base. Simple building algorithms for the formation of Y-Bus matrix and Z-Bus matrix.
UNIT - II POWER FLOW ANALYSIS
Importance of power flow analysis in planning and operation of power systems. Statement of power flow problem - classification of buses into P-Q buses, P-V (voltage-controlled) buses and slack bus. Development of Power flow model in complex variables from and polar variables form. iterative solution using Gauss-Seidel method including Q-limit check for voltage-controlled buses - algorithm and flow chart. Iterative solution using Newton-Raphson (N-R) method (polar form) including Q-limit check and bus switching for voltage-controlled buses - Jacobian matrix elements - algorithm and flow chart. Development of Fast Decoupled Power Flow (FDPF) model and iterative solution - algorithm and flow chart: Comparison of the three methods.
UNIT - III FAULT ANALYSIS - BALANCED FAULTS
Importance short circuit (or) for fault analysis - basic assumptions in fault analysis of power systems. Symmetrical (or) balanced three phase faults - problem formulation - fault analysis using Z-bus matrix - algorithm and flow chart. Computations of short circuit capacity, post fault voltage and currents.
UNIT - IV FAULT ANALYSIS - UNBALANCED FAULTS
Introduction to symmetrical components - sequence impedances - sequence networks - representation of single line to ground fault conditions. Unbalanced fault analysis - problem formulation - analysis using Z-bus impedance matrix -(algorithm and flow chart.)
UNIT - V STABILITY ANALYSIS
Importance of stability analysis in power system planning and operation - classification of power system stability - angle and voltage stability - simple treatment of angle stability into small-signal and large-signal (transient) stability Single Machine Infinite Bus (SMIB) system: Development of swing equation - equal area criterion - determination of critical clearing angle and Runge-Kutta second order method. Algorithm and flow chart.
TEXT BOOKS :
1. Hadi Saadat, 'Power System Analysis', Tata McGraw Hill Publishing Company, New Delhi,2002.
2. Olle. I. Elgerd, 'Electric Energy Systems Theory - A n Introduction', Tata Mc Graw Hill Publishing Company Limited, New Delhi, Second Edition, 2003.
REFERENCES :
1. P. Kundur, 'Power System Stability and Control, Tata McGraw Hill, Publications, 1994.
2. John J.Grainger and W.d. Stevenson Jr.,'Power System Analysis,' McGraw Hill International Book Company, 1994.
3. I.J. Nagarath and D.P . K othari, 'Modern Power System Analysis',Tata McGraw-Hill Publishing Company, New Delhi, 1990.
4. K. Nagasarkar and M.S.Sukhija Oxford Univirsity Press, 2007.
Download Links :
Attachments: